Coyote 28" Pellet Grill Insulated Jacket
Product Description
The Coyote 28" Pellet Grill Insulated Jacket provides the protective enclosure needed when a Coyote C1P28 or C2P28 pellet grill is installed near combustible outdoor kitchen materials. Made from 304 stainless steel, the jacket creates a dedicated barrier around the grill body while allowing the appliance to be incorporated into the finished island.
Unlike a liner selected simply by nominal grill width, model CJAKTC1P28 is sized specifically for Coyote's 28" pellet grill platform. Its taller body and deeper installation profile account for the design of the pellet grill, making the correct jacket an important part of planning the cabinet opening and countertop before fabrication begins.
Key Features
- 304 stainless steel construction: Provides a durable enclosure around the compatible pellet grill.
- Pellet grill-specific fit: Designed for Coyote C1P28 and C2P28 28" pellet grills.
- Protection near combustible materials: Used as part of the required installation when combustible material falls within Coyote's specified clearance area.
- Countertop-supported design: The insulated jacket is designed to hang from the countertop without bottom support.
- Purpose-sized enclosure: Accounts for the height and depth of the compatible pellet grill rather than relying on nominal grill width alone.
A pellet grill has a different body profile and installation layout than a similarly sized gas grill, so the insulated enclosure needs to match the appliance rather than just the advertised width. The CJAKTC1P28 gives homeowners and installers a Coyote-specific solution for integrating the 28" pellet grill into an outdoor kitchen while maintaining the required separation from surrounding combustible construction.
Why Choose This Model?
The CJAKTC1P28 is the insulated jacket Coyote lists for both the C1P28 and C2P28 pellet grills. Using the matching jacket removes the guesswork involved in adapting a gas-grill liner or universal enclosure to the taller pellet grill body. It also gives the designer a defined opening to work from when coordinating cabinets, countertops, electrical access, and the finished grill position.
Frequently Asked Questions
Can I use an insulated jacket made for a 28" gas grill?
Do not substitute an insulated jacket based on width alone. Pellet grills can have different body heights, depths, and installation requirements than gas grills. Coyote specifically lists the CJAKTC1P28 for its C1P28 and C2P28 28" pellet grills.
Does installing the insulated jacket remove the other clearance requirements?
No. The insulated jacket addresses one part of a combustible-enclosure installation. Coyote states that ventilation, required clearances, and the other installation requirements in the appliance documentation still apply.
Does the jacket need to be supported from underneath?
No. Coyote's current installation guidance states that the insulated jacket is designed to hang from the countertop without bottom support. The countertop and surrounding structure should therefore be planned for the jacket before fabrication is completed.
When is an insulated jacket required?
Coyote's current installation guidance states that a Coyote insulated jacket must be used when combustible material is located within 24" of the grill. Always follow the current pellet grill manual and installation documentation for the complete clearance and ventilation requirements.
Technical Specifications
| Brand | Coyote Outdoor Living |
| Model / SKU | CJAKTC1P28 |
| Product Type | Pellet Grill Insulated Jacket |
| Material | 304 Stainless Steel |
| Compatible Grills | Coyote C1P28 and C2P28 28" pellet grills |
| Installation Cutout | 27 1/4" W x 22 1/2" D x 17 1/4" H |
| Overall Dimensions | 30" W x 24 3/4" D x 17 3/4" H |
| GTIN / EAN | 787790119746 |
Expert Installation & Performance Notes
Coyote specifies that this insulated jacket hangs from the countertop and does not require bottom support. Plan the countertop opening and supporting island structure around the published jacket dimensions before countertop fabrication or finish work begins.
The insulated jacket does not replace the remaining installation requirements for the pellet grill. Maintain the required ventilation and clearances, and plan electrical access so the grill can be connected and serviced without removing finished portions of the island. Coyote states that combustible materials must normally remain at least 24" from the grill unless the appropriate insulated jacket is used.
Manuals & Specification Resources
